NCSD Network

National Councils for Sustainable Development

Biomagnification: Definition, Examples and Why It Matters

Biomagnification is the rise in a substance’s concentration in the tissues of organisms at successively higher levels of a food chain. When contaminated prey are consumed, a predator can end up with a higher tissue concentration than the organisms it eats. Contaminants present at low levels in water can thus accumulate to harmful levels in fish, birds, wildlife, and humans.

Biomagnification begins when contamination moves up a food chain

Biomagnification is an ecosystem process occurring across connected feeding relationships rather than within an individual animal. As consumers feed on organisms from lower levels, persistent contaminants that resist elimination increase in concentration toward the top of the food web.

A simple ratio tests a predator–prey pair

The biomagnification factor (BMF) compares pollutant levels between a consumer and its prey: BMF = contaminant in consumer (mg/kg) divided by contaminant in prey (mg/kg). A BMF greater than 1 indicates biomagnification. Across an entire food web, scientists use the trophic magnification factor (TMF); a TMF above 1 indicates biomagnification, while a TMF below 1 indicates trophic dilution.

Bioaccumulation happens within one organism

Bioaccumulation refers to an individual organism taking in and storing a substance from all environmental sources, including water, air, soil, and food. Biomagnification specifically evaluates changes in concentration across trophic levels.

Term What it compares Key point
Bioaccumulation An organism and its surroundings Includes uptake from water, air, soil, and food.
Bioconcentration An organism and surrounding water Non-dietary uptake, primarily through gills in aquatic organisms.
Biomagnification A consumer and its prey Concentrations increase between trophic levels.

Bioconcentration is a specific form of bioaccumulation. The bioconcentration factor (BCF) compares an organism’s concentration in mg/kg with the water concentration in mg/L. A bioaccumulation factor (BAF) additionally accounts for dietary uptake, whereas the BMF compares a predator’s tissue concentration directly to that of its prey.

A substance can bioaccumulate without biomagnifying. Lead is a standard example: it accumulates in specific tissues, yet in freshwater systems its concentration frequently declines with increasing trophic level.

Why certain pollutants magnify instead of breaking down

Two primary properties enable biomagnification: resistance to metabolic breakdown and retention within tissue. Many persistent organic pollutants are lipid-soluble, storing in fat rather than being excreted. DDT is one such compound; it has extremely low water solubility and progressively accumulates in fatty tissue.

Other persistent contaminants follow different pathways. PFAS do not accumulate in lipid tissue; instead, they bind to blood and tissue proteins and accumulate in the blood, liver, and kidneys.

Polychlorinated biphenyls (PCBs) were used as cooling fluids in the United States until their manufacture was banned in 1979. In Saginaw Bay of Lake Huron, walleye were found to have more than four times the PCB concentration of phytoplankton. Birds consuming these fish can reach PCB levels at least an order of magnitude higher than lake fish.

DDT shows how a contaminant can reach top predators

In a Long Island estuary, DDT biomagnification was documented across four trophic levels, resulting in an overall 600-fold increase from plankton to fish-eating birds.

Organism group DDT level
Plankton 0.04 mg/kg
Invertebrates 0.3 mg/kg
Fish 4.1 mg/kg
Fish-eating birds 24 mg/kg

DDT metabolizes to DDE, which inhibits normal calcium deposition during eggshell formation. The resulting thin-shelled eggs broke during incubation, severely impacting bald eagles, ospreys, peregrine falcons, brown pelicans, and other fish-eating bird species.

By 1963, only 417 nesting pairs of bald eagles remained in the continental United States. Following the EPA’s ban on most uses of DDT in 1972 and associated protections, nesting pairs recovered to an estimated 71,467 by 2018–2019.

Mercury can turn a food-web pattern into a human health concern

Methylmercury is the heavy-metal contaminant most consistently demonstrated to biomagnify through aquatic food webs. The U.S. Geological Survey reports that methylmercury concentrations in predatory fish are typically more than one million times higher than in the surrounding water.

Contamination levels vary substantially across fish species: herring averages about 0.01 ppm of mercury, whereas FDA data from 1990–2012 show average concentrations of 0.995 ppm for swordfish, 0.979 ppm for shark, and 1.123 ppm for Gulf tilefish. Tuna sits in between: canned light tuna averages 0.126 ppm, and albacore contains about three times as much.

Methylmercury is readily absorbed through the digestive tract, crosses both the blood-brain and placental barriers, and causes nerve cell damage. Consequently, the FDA and EPA advise pregnant women, breastfeeding mothers, and young children to avoid swordfish, shark, king mackerel, and Gulf tilefish. For people who are pregnant, the advice is to eat up to 12 ounces per week of low-mercury fish, including two to three servings from the "Best Choices" list.

How to read a fish choice through the food web

  1. Identify whether a species is a long-lived, high-trophic-level predator.
  2. Note that lower-trophic species have substantially lower concentrations: FDA averages list shrimp at 0.009 ppm, sardines at 0.013 ppm, and salmon at 0.022 ppm.
  3. Consult FDA/EPA consumption categories for vulnerable groups rather than treating all fish species equally.

Biomagnification can reshape more than one species

Because apex predators consume large volumes of prey, they experience the highest exposure levels. Beyond direct reproductive failure, such as eggshell thinning from DDT, population declines in top predators can cause cascading ecological effects throughout food webs, affecting prey species as well as plant and plankton communities.

Minamata disease demonstrated the human risks of contaminated aquatic food chains. Industrial releases of methylmercury into Minamata Bay accumulated in fish and shellfish, leading to severe neurological damage in consumers. By the end of 1956, 54 cases and 17 deaths were confirmed; long-term estimates reached approximately 5,000 deaths and up to 50,000 affected individuals.

The most effective response is to restrict contaminants at their source. The 1972 U.S. restrictions on DDT, the 1979 ban on PCB manufacture, the Stockholm Convention on persistent organic pollutants (adopted in 2001), and the Minamata Convention on Mercury (adopted in 2013) all aim to keep persistent compounds out of food webs.

Common biomagnification myths, corrected

Myth: Every pollutant biomagnifies

Biomagnification requires resistance to breakdown and retention in organism tissue. Some pollutants, such as lead, bioaccumulate within specific tissues but often decrease in concentration at higher trophic levels in freshwater systems.

Myth: Biomagnification and bioaccumulation are interchangeable

Bioaccumulation occurs within an individual organism across all environmental exposure routes. Biomagnification describes the increase in chemical concentration from prey to predator across trophic levels.

Myth: A low concentration in water means no risk higher up

Water concentrations alone do not represent exposure risk. Through successive trophic transfers, methylmercury concentrations in predatory fish can exceed surrounding water levels by more than a million times.

Frequently Asked Questions

What is biomagnification in simple terms?

Biomagnification is the increase in a contaminant’s concentration in animal tissue from one trophic level to the next, causing predators to have higher tissue concentrations than their prey.

What is biomagnification vs. bioaccumulation?

Bioaccumulation is the accumulation of a substance within an individual organism from water, air, soil, and food. Biomagnification is the progressive increase in contaminant concentration across trophic levels in a food web.

What is a real-life example of biomagnification?

In a Long Island estuary, DDT concentrations increased 600-fold across four trophic levels, rising from 0.04 mg/kg in plankton to 24 mg/kg in fish-eating birds.

Which best describes biomagnification?

Biomagnification is best described as an increase in pollutant concentration in organisms at successively higher trophic levels within a food chain.

How does biomagnification affect the food chain and the environment?

Top predators carry the highest concentrations, so they are harmed first. DDT thinned the eggshells of bald eagles, ospreys, and other fish-eating birds, and the decline of top predators can trigger cascading effects down to plant and plankton communities.

Does biomagnification affect humans?

Yes. Methylmercury biomagnifies in aquatic food chains and reaches elevated levels in predatory fish. When consumed, it crosses the blood-brain and placental barriers and can damage nerve cells.

Which substances cause biomagnification?

Substances that resist metabolic breakdown and stay stored in tissue biomagnify. Examples include DDT, PCBs, and methylmercury. PFAS also biomagnify, although they bind to blood and tissue proteins rather than fat.

Related explainers

Sustainable development meets the needs of the present without compromising the ability of future generations to meet their own.